-

Module 10 ngõ vào và 16 ngõ ra UniPOS FD7203

Module 10 ngõ vào và 16 ngõ ra UniPOS FD7203

Mã sản phẩm: FD7203
Hãng sản xuất: UniPOS
Xuất xứ: Bulgaria
Van NGUYEn">Van NGUYEn 23/06/2017

Thông tin chi tiết

Module 10 ngõ vào và 16 ngõ ra UniPOS FD7203

Module 10 ngõ vào và 16 ngõ ra UniPOS FD7203
                              Module 10 ngõ vào và 16 ngõ ra UniPOS FD7203

Mô tả Module 10 ngõ vào và 16 ngõ ra UniPOS FD7203

Module UniPOS FD7203  có 10 ngõ vào và 16 ngõ ra điều khiển, mỗi ngõ có thể cài đặt một cấu hình riêng, có tích hợp mạch cách ly sự cố Insolator. Các ngõ vào ra được mô phỏng trên màn hình hiện thị và kết nối với trung tâm báo cháy IFS7002.

Module 10 ngõ vào và 16 ngõ ra UniPOS FD7203
                                                Màn hình hiện thị Module UniPOS7203

Thông số kỹ thuật:

Physical configuration:
– 1 fire alarm loops
– 2 monitored outputs
– 1 relay outputs for fire condition
– 1 programmable relay outputs for fire condition
– 1 relay output for fault conditions

Fire alarm zones:
– Maximum number of zones – 64
– Maximum number of fire detectors and in-out devices – 60

Fire alarm loops:
– Maximum number of fire detectors in a loop – 125
– Connecting line – two-wire shielded
– Maximum resistance of a loop – 100
– Output resistance of a loop – 20
– Maximum consumption of a loop – 200mA

Monitored outputs: – 2 pcs
– Type – potential
– Еlectrical characteristics – (24±5)V/0,5A

Relay output for fire conditions – 1 pc
– Type – potential free, switching
– Electrical characteristics – 3A/125VAC; 3A/30VDC

Relay (programmable) output for fire conditions – 1 pc
– Type – potential free, switching
– Electrical characteristics – 3A/125VAC; 3A/30VDC

Relay output for fault conditions – 1 pc
– Type – potential free, switching
– Electrical characteristics – 3A/125VAC; 3A/30VDC

Performance:
– Control over fire alarm loops and monitored outputs for fault conditions (short circuit and interruption) and automatic reset
– Dedicated led indication per fire zone
– Detection of removed devices in the loops and automatic reset
– Ability to set the zones in Coincidence Mode
– Two phases of Fire condition, programmable time for Fire condition stage I, separately for each zone
– Option to prolong the time period for Fire condition stage I with programmable inspection period, specified for each zone
– Built-in sounder for fire condition – one tonal, discontinuous, can be switched off
– Built-in sounder for fault condition – one tonal, discontinuous, can be switched off
– Built-in real time clock
– Set of test modes and options for adjustment

– Setting the clock:
– Check ups on light and sound indications
– Test of fire alarm zones
– Adjustment of outputs and integrated external devices
– Programming of parameters and modes of operation
– Remote programming of the parameters from distant operator control point

– Energy independent event log of registered events with the events type, date and hour – up to 1023 events
– Interfaces for communication with external devices – CAN 2.0B and USB.

Indications of registered events:
– Light indication – LED
– Text messages – LCD display, 320 х 240 points, backlit
– Sound signaling – built-in sounder

Power supply:
Mains:
– voltage – 220/230V
– frequency – 50Hz

Back up batteries:
– battery type – lead, gel electrolyte
– number of batteries – 2 pcs
– connection – serial connection
– nominal voltage of the back up battery – 2x12V DC
– nominal capacity C20 – 7Ah
– charge voltage – 28V

Consumption on back up batteries supply:
– at 24V – <160mA
– at 26V – < 150mA

Power supply to external devices:
– Voltage – (24±5)V
– Maximum current value (including current of monitored outputs) – 1А

Dimensions:
– Overall dimensions – 286 x 148 x 125 mm
– Weight (batteries not included) – 1.240 kg.

Cách lắp đặt

 

 

Module 10 ngõ vào và 16 ngõ ra UniPOS FD7203
                                     Hướng dẫn lắp đặt thiết bị kiểu mạch nhánh

Bạn muốn xem thêm:

Trung tâm báo cháy địa chỉ UniPOS IFS7002

Đầu báo khói địa chỉ UniPOS FD7130

Hệ thống báo cháy thường UniPOS

Tin tức mới